Wind Power,Wind Turbine Manufacturer » Wind Power Tender information http://www.ahjlkj.cn Professional Wind Turbine、Windmill Power、Wind Power Generators in China Mon, 06 Feb 2012 15:30:21 +0000 http://wordpress.org/?v=2.9.1 en hourly 1 Wind Power Superhighway Speeds Ahead http://www.ahjlkj.cn/archives/104 http://www.ahjlkj.cn/archives/104#comments Thu, 11 Jun 2009 23:43:11 +0000 admin http://www.ahjlkj.cn/?p=104 WindWind power may be one of the most important alternative energies in the United States, but it’s useless if we don’t have transmission lines to transport the energy from wind-rich rural areas in the Midwest to cities with large wind power demands. That’s where the Green Power Express–a 3,000 mile wind power superhighway designed to transmit 12,000 megawatts of power from the Upper Midwest to Midwestern and Eastern states–comes in.

The $10 to $12 billion project has been on hold since February due to bureaucratic hurdles. But now that the Federal Energy Regulatory Commission (FERC) has approved transmission investment incentives, putting the Green Power Express back on track.

As a result of the approval, FERC will provide access to wind power generation and improved transfer capability as well as a host of monetary incentives, including deferred recovery for start-up costs and the  the inclusion of 100% of construction work in the project’s rate base.

The project won’t be completed until 2020. When the Green Power Express is finally finished, it will provide the electrical backbone necessary to make alternative energy accessible to the masses–in addition to cutting 34 million metric tons of CO2 emissions, or the equivalent of nine to 11 million cars.

Related Articals

]]> http://www.ahjlkj.cn/archives/104/feed 0 The development of wind power is a general trend http://www.ahjlkj.cn/archives/83 http://www.ahjlkj.cn/archives/83#comments Fri, 15 May 2009 09:37:16 +0000 admin http://www.ahjlkj.cn/?p=83 Track drive vehicle traction changzhou Engineering Research Center, Jiangsu new reputation, deputy general manager of Wind Power Equipment Co., Ltd., Senior Engineer, is the earliest Changzhou R & D engaged in wind power generation equipment, one of the scientific and technological personnel. Jiangsu new wind power equipment Fitch Co., Ltd. in Jiangsu province is the largest wind power machine manufacturing enterprises in terms of National Development and Reform Commission before the whole top ten list of large enterprises is Changzhou in Jiangsu province as well as wind power equipment manufacturing enterprises. Recently, Changzhou City Association for Science and Technology on the wind power equipment manufacturing companies interviewed孙总related issues. 

Municipal Association for Science and Technology (hereinafter referred to as “Branch”): wind power energy in the new location at what? Development trend? 

Sun Cheng-ping (hereinafter referred to as “Sun”): the so-called new energy sources, mainly wind power, solar power generation and power generation, such as straw. Among them, the straw power generation is also a kind of thermal power. The high cost of solar power, it is rather difficult and the practical application of industry. Wind power is the most potential for development, most of the trades industry. Wind power boost to the economy, not only reflected in the new energy, but also in driving the new economy plays an important role. A 1.5-megawatt generating units 1,000 million, to pull, such as steel, resin, glass steel, bearings, gear box and so on related industries. Thus, while the current wind power in the grid there are still some difficulties in scheduling, but its availability, the most feasible and does not consume resources when work is not only clean energy is renewable energy, wind power development is the trend. 

Section: Changzhou, the development of wind power equipment manufacturing industry to the status quo? Expanding domestic demand in the circumstances which can grasp the opportunity? 

Sun: Changzhou reputation only do the new wind power machine, there are some ancillary business, such as glass steel, gear, gear box, etc., industry has been taking shape, but the advantages have not yet formed a fist, but individual package. Only do support fiberglass cabin and gear cover more processing can be regarded as large. The industry as a whole has not yet formed the industrial chain. At present, wind power equipment, the most important problem facing businesses is the lack of operating experience units, units are brand new MW-class problems. The development of wind power does not depend on the Government’s policy of pulling and support, but also rely on the market speak for the allocation of resources.

From the overall environment, while experiencing a financial crisis, investment in wind power signs of slowing down, but the demand for long-term will not be changed. Because the reduction of carbon dioxide emissions, environmental protection, rational use of available resources of science is the subject of a permanent human society, thermal power and clean energy development must be a certain percentage. Wind power equipment manufacturers still have development potential. From the present situation of Changzhou, Changzhou, many companies have the gear box, the ability to manufacture castings. Casting in particular, wind power generator  is now the bottleneck parts, as long as they can meet the requirement, there is still room for development. 

Section: New reputation as a province of wind power equipment manufacturing enterprises, the successful experience of what? 

Sun: New reputation is the only company to do both machine and equipment, and so leaves parts, generators and other major components of the business components, but also the most parts the country to do business machine. New reputation in May 2005 from the start the wind power equipment, research and technology development, is involved in Changzhou first wind power equipment manufacturing businesses. As the wind power technology and traction technology is similar to the track so that the new advantage of a great reputation. Namely, human resources, we have a provincial-level R & D center, with many experts at home and abroad. Second, test equipment, we have more than one million ground-based test equipment can be used directly for research and development, which we have a high starting point. 

At present, the development of wind power equipment is the introduction of foreign technology, through to buy technology, the progressive realization of China. The prevalence of domestic enterprises to master the technical depth of the problem is not enough, the majority of state-owned enterprises to buy a permit to go the way R & D personnel to master the core technology, the need for a very long process. The new Fitch did not take this path, we recognize the need to have our own R & D capability. Therefore, we did not buy a permit to start, but 863 countries have bought a high-tech research projects planned platform, and then rely on the well-known abroad, the main supporting pieces of the company, a joint check of the design and upgrade on this basis. After two or three times to upgrade, so that their access to research and development, the achievement of personnel training, and now, it has become our advantage. 

Division: For those who have been engaged in or want to pursue a wind power equipment manufacturing enterprises have any suggestions? 

Sun: the threshold of wind power equipment manufacturers, but great potential. Want to do a good job, it is necessary for wind power equipment manufacturers are fully aware of. Wind power equipment, special products, the unpredictability of the wind makes it difficult to make in theory, very close to the actual mathematical model; and wind power equipment in the high-altitude operation meters, it is necessary to deal with, such as wind, thunderstorms and other bad environment, problems with a large maintenance costs. Therefore, wind power equipment for higher quality and reliability requirements. In accordance with international standards, wind power equipment to ensure that the life span of two decades. 

In addition, as a result of wind power equipment manufacturers invest more and want to enter the wind power equipment manufacturing enterprises, first of all to have a certain size, to ensure that the corresponding input, re-use products to do their own advantages, and only have competitive prices

Related Articals

]]> http://www.ahjlkj.cn/archives/83/feed 0